BSYLD - 01564 ALMAG OIL

  • MSDS: BSYLD
  • Manufacturer: TEXACO INC
  • Product Name: 01564 ALMAG OIL
  • National Stock Number: 9150-01-048-9554
Product Identification

Product ID:01564 ALMAG OIL
MSDS Date:12/05/1990
FSC:9150
NIIN:01-048-9554
MSDS Number: BSYLD

Responsible Party
TEXACO INC
1111 RUSK
HOUSTON, TX 77052
US

Emergency Phone: 914-831-3400 800-424-9300(CHEMTREC)

Info Phone: 914-838-7204/7509

Cage: 3B431

Contractor
TEXACO PIPELINE INC (SUB OF TEXACO INC)
42286 HOUSTON, TX 77242-2286 US

Telephone: 713-953-4260

Cage: 3B431

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED LIGHT

CAS: 64742-53-6

RTECS: PY8036000

Fraction By Weight: 100%

ACGIH TLV: 5 MG/M3 (OIL MIST)

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT) IS >5 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:MISTS/VAPORS MAY CAUSE NOSE OR
THROAT IRRITATION.INGEST:MAY CAUSE ABDOMINAL DISCOMFORT.MAY CAUSE
LUNG DAMAGE IF VOMITED AFTER SWALLOWING.EYES:MAY CAUSE MINIMAL
IRRITATION.SKIN:PROLONGED CONTACT MAY CAUSE IRRITATION,DEFATTING.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of
Overexposure:INHAL:HEADACHE,NAUSEA,DROWSINESS.INGEST:NAUSEA,DIARRHE
A.SKIN:LOCAL REDNESS,MILD DISCOMFORT.
Medical Cond Aggravated by Exposure:BECAUSE OF ITS DEFATTING
PROPERTIES,PERSON WITH EXISTING DERMATITIS MAY BE ADVERSELY
AFFECTED.

First Aid

First Aid:SKIN:REMOVE CONTAMINATED CLOTHING;WASH WITH SOAP AND
WATER.EYES:FLUSH WITH WATER FOR 15 MINUTES.INHAL:REMOVE TO FRESH
AIR.GIVE OXYGEN OR ARTIFICIAL RESPIRATION IF NEEDED.INGEST:GET
PROMPT QUALIFIED ME DICAL ATTENTION.INDUCE VOMITING ONLY UNDER THE
ADVICE OF A PHYSICIAN.

Fire Fighting

Flash Point Method:COC
Flash Point:265F,129C
Extinguishing Media:WATER SPRAY,DRY CHEMICAL,FOAM,CARBON DIOXIDE.WATER
OR FOAM MAY CAUSE FROTHING.
Fire Fighting Procedures:USE A SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.COOL FIRE EXPOSED CONTAINERS AND DISPURSE
VAPORS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:VENTILATE AREA.USE PROPER RESPIRATORY AND
PROTECTIVE EQUIPMENT FOR LARGE LEAK.DIKE.SOAK UP WITH A
NON-COMBUSTIBLE INERT ABSORBANT(CLAY,SAND);PLACE IN PROPER
CONTAINER FOR DISPOSAL.WASH SPILL AREA TO R EMOVE SLIPPINESS.DO NOT
FLUSH TO SEWER.
Neutralizing Agent:NONE

Handling

Handling and Storage Precautions:MAINTAIN MINIMUM FEASIBLE HANDLING
TEMPERATURE.PERIODS OF HIGH TEMPERATURE SHOULD BE AVOIDED.AVOID
WATER CONTAMINATION.
Other Precautions:"EMPTY" CONTAINERS CAN CONTAIN EXPLOSIVE VAPORS. DO
NOT CUT, DRILL, GRIND, WELD OR PERFORM SIMILAR OPERATIONS ON OR
NEAR CONTAINERS.

Exposure Controls

Respiratory Protection:WHERE ENVIRONMENTAL CONTROLS ARE LACKING OR IN
ENCLOSED SPACES USE A SELF-CONTAINED BREATHING APPARATUS.
Ventilation:LOCAL VENTILATION(EXPLOSION-PROOF EQUIPMENT) AT THE
WORKSITE;MECHANICAL(GENERAL) VENTILATION TO MAINTAIN TLV/PEL.
Protective Gloves:NEOPRENE, NITRILE, OR POLYVINYL ALCOHOL
Eye Protection:USE CHEMICAL SAFETY GOGGLES & FACESHIELD
Other Protective Equipment:INDUSTRIAL WORK CLOTHING TO MINIMIZE
CONTACT. RUBBER APRON AD BOOTS AS REQUIRED. EYE BATH AND SAFETY
SHOWER RECOMMENDED.
Work Hygienic Practices:WASH THOROUGHLY AFTER USING PRODUCT AND BEFORE
EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:424F,218C
Viscosity:9.49CST@40C
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIQUID;LIGHT PALE

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT OR COMBUSTION.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON
DIOXIDE,IRRITATING ALDEHYDES AND KETONES.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL REGULATIONS.UNUSED PRODUCT IS NOT RCRA HAZARDOUS WASTE;USED
PRODUCT MAY BE HAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.